Elite Water Heater Services

How to Test a Water Heater T&P Valve

Testing a water heater T&P valve takes a minute, and it tells you whether the tank’s main safety device still works. If it does not, call a provider promptly.

How to test it

Place a bucket under the discharge pipe, then lift the test lever briefly. Hot water should flow out, and stop when you release the lever.

Stand clear of the discharge — the water is scalding hot.

What the results mean

If water flows and stops cleanly, the valve works. If no water comes out, the valve may be stuck shut, which is a safety problem.

If water keeps dripping after the test, the valve may be worn, or the home may have high water pressure or a failed expansion tank.

How often to test

Most manufacturers suggest testing once or twice a year, as part of routine maintenance.

If the valve is old, corroded, or has never been tested, ask a provider to check it rather than forcing the lever.

how to test a water heater T&P valve — Elite Water Heater Services
How to Test a Water Heater T&P Valve

Water Heater Services Available

Frequently Asked Questions

Most manufacturers suggest lifting the test lever once or twice a year. If it does not open, or does not reseat and keeps dripping, call a provider.

Yes, with care — the water is scalding hot, so stand clear of the discharge and use a bucket. If the valve is old or corroded, ask a provider to check it.

The valve may be worn, or the home may have high water pressure or a failed expansion tank. Call a provider to find which one it is.

Follow Us on Socials
FacebookInstagramPinterest
Call Now: (480) 919-8156