Elite Water Heater Services

Gas Water Heater Pilot Light Repair

Gas water heater pilot light repair — when the pilot will not stay lit or will not light at all. Elite connects you with a local provider.

The pilot light is the small flame that lights the main burner on a gas water heater. When it will not stay lit, the burner never fires and there is no hot water. The usual causes are a failed thermocouple, a dirty pilot orifice, a faulty gas valve or a draught blowing the flame out.

Elite connects you with an independent local provider for pilot light repair. The provider finds the cause, replaces the failed part and tests the burner before leaving.

Why a pilot light will not stay lit

A thermocouple that has worn out is the most common cause — it stops telling the gas valve the pilot is lit, so the valve shuts the gas off. A pilot orifice clogged with dust or soot gives a weak flame that the thermocouple cannot sense. A gas valve fault is less common but more expensive.

If the pilot has gone out once, it is safe to relight it once following the instructions printed on the unit. If it goes out again, do not keep relighting it — call a provider.

Safety first

If you smell gas, do not try to relight the pilot. Leave the house and call your gas company or emergency services from outside. Never use a naked flame to check for a gas leak. Call (480) 919-8156 to check availability in your area.

Frequently Asked Questions

Usually a worn thermocouple, a dirty pilot orifice or a faulty gas valve. A provider tests each one to find the cause.

Once, following the instructions on the unit. If it goes out again, or you smell gas, stop and call a provider.

Pilot and thermocouple work falls inside the published gas repair range of about $150 to $500 (HomeAdvisor, 2026). Your provider gives you their own price.

Follow Us on Socials
FacebookInstagramPinterest
Call Now: (480) 919-8156