Elite Water Heater Services

Why Is My Water Heater Making a Popping Noise?

Water heater making a popping noise? Learn why sediment causes popping, when flushing fixes it, and when to call a provider.

A water heater making a popping noise is almost always sediment. Mineral scale settles on the bottom of the tank, water gets trapped underneath it, and the trapped water boils and pops as it escapes. It is the most common water heater noise, and it is the most fixable.

Popping alone is not usually dangerous, but it is not harmless either: sediment insulates the bottom of the tank, makes the heater work harder, and shortens the tank's life.

Why sediment pops

In hard-water areas, sediment builds up fast. The layer of scale on the bottom of the tank traps water beneath it. When the burner or element heats the tank, the trapped water boils, and the steam bubbles pop as they escape through the sediment.

The louder and more frequent the popping, the thicker the sediment. A tank that has never been flushed in a hard-water area can have several inches of it.

What fixes it

Flushing the tank usually fixes popping, unless the sediment has hardened into a crust. A provider flushes the tank and checks the anode rod at the same time. If flushing does not stop the noise, the sediment may be too thick, or the tank may be near the end of its life. Call (480) 919-8156 to check availability in your area.

Frequently Asked Questions

Popping alone is usually not dangerous, but it shortens the tank's life. A provider should check it.

Often, yes — if the sediment has not hardened. A provider can tell you whether a flush will work.

At least once a year, and every six months where the water is hard.

Follow Us on Socials
FacebookInstagramPinterest
Call Now: (480) 919-8156